Aspect Gondola Panel Union Connector
- $9.50
The Aspect Panel Union Connector – Matte Black creates a clean, uninterrupted connection between two adjacent Aspect Gondola Panels. The raw steel bracket slides inside the internal frame and is bolted through the exterior with matte black hardware, maintaining a sleek visual across your display line.
While the connector aligns the panels and prevents sagging, it doesn't provide standalone support. To build a freestanding merchandiser, you'll need T-Legs or 90° Gondola Panels at both ends.
Each connector includes four 5/16" diameter x 3/4" long bolts. Two connectors are required per connection — one for the top and one for the bottom.
Compatible with the Aspect Retail Display System, this part is key to assembling extended displays with a professional finish.
Technical Specifications:
-
Finish: Internal connector is raw steel; mounting screws are matte black
-
Use: Connects two panels side by side
-
Installation: Hidden inside panel frame, bolts through outer tubing
-
Hardware: 4 bolts per unit (5/16" dia. x 3/4" long)
-
Required per setup: Two connectors (top and bottom)
-
Freestanding requirement: Use with T-Legs or 90° Gondola Panels
-
Sold individually
-
Connects two Gondola Panels side by side with hidden internal support
-
Finished in raw steel with matte black mounting bolts
-
Requires two connectors per setup (top and bottom) and panel support at ends
Specifications
| Pieces Per Full Carton | 40 |
| Multiple Cartons | 1 |
| Carton Shipping Weight (Lbs.) | 40.01 |
| Carton Dimensions | 10"L x 9"W x 5"H |
| GTIN Number | 00841134136926 |
| Finish | Matte Black |
| Finish | Matte Black |
Specifications
| GTIN Number | 00841134136926 |
| Finish | Matte Black |
| Finish | Matte Black |
| Pieces Per Full Carton | 40 |
| Multiple Cartons | 1 |
| Carton Shipping Weight (Lbs.) | 40.01 |
| Carton Dimensions | 10"L x 9"W x 5"H |
- $9.50
The Aspect Panel Union Connector – Gloss White is the hidden strength behind seamless multi Aspect gondola Panel setups. Designed to slide within the frame of each panel, it delivers a clean connection point without exposed brackets. Four zinc-finished 5/16" diameter x 3/4" long bolts are included to secure the joint externally.
Each connection requires two union connectors — one at the top and one at the bottom — to ensure alignment and eliminate sag. Though this bracket creates a strong structural link, it does not allow side-by-side panels to stand alone.
To make the system freestanding, you must use T-Legs or 90° Gondola Panels on both ends.
Fully compatible with the Aspect Retail Display System, this connector is essential for continuous, clean, and stable runs in bright retail environments.
Technical Specifications:
-
Finish: Raw steel internal connector; zinc-finished mounting bolts
-
Connection: Side-by-side panel joinery
-
Installation: Slides inside frame; bolts through steel tubing
-
Hardware: 4 bolts per bracket (5/16" dia. x 3/4" long)
-
Required per install: 2 connectors (top and bottom)
-
Freestanding setup: Requires T-Legs or 90° Gondola Panels on ends
-
Sold as: Individual connector
-
Connects two Aspect Gondola Panels side by side with flush alignment
-
Internal bracket remains hidden; zinc-finished bolts match Gloss White finish
-
Requires two connectors per setup and side support for freestanding use
Specifications
| Multiple Cartons | 1 |
| Carton Shipping Weight (Lbs.) | 40.01 |
| Carton Dimensions | 10"L x 9"W x 5"H |
| GTIN Number | 00841134136933 |
| Finish | Gloss White |
| Pieces Per Full Carton | 40 |
Specifications
| GTIN Number | 00841134136933 |
| Finish | Gloss White |
| Pieces Per Full Carton | 40 |
| Multiple Cartons | 1 |
| Carton Shipping Weight (Lbs.) | 40.01 |
| Carton Dimensions | 10"L x 9"W x 5"H |
-
Connects two Aspect Gondola Panels side by side for seamless display
-
Hidden installation inside the frame preserves a clean outer look
-
Requires support from T-Legs or 90° Gondola Panels for freestanding stability
The Aspect Panel Union Connector creates a secure link between two Aspect Gondola Panels placed side by side. Designed to slide within the panel frame and bolt externally, the connection is discreet yet structurally sound, allowing for an uninterrupted visual flow across your modular display.
The internal connector is finished in clear coat raw steel and is paired with matching mounting bolts — matte black screws for black panels and zinc steel for white setups. Four 5/16" diameter x 3/4" long bolts are included with each unit.
While the union connector eliminates sag between panels and aligns frames perfectly, it does not provide standalone support. To form a stable freestanding fixture, you must anchor both ends using T-Legs or additional Gondola Panels set at 90° angles.
Compatible with the Aspect Retail Display System, this piece is essential for creating continuous wall runs and professional merchandising displays.
Technical Specifications:
-
Use: Joins two Aspect Gondola Panels side by side
-
Material: Clear coat raw steel (internal)
-
Installation: Must use two connectors per setup. Slides inside panel frame; bolts through outer tubing
-
Hardware included: 4 bolts (5/16" dia. x 3/4" long)
-
Finish: Screws match selected finish (matte black or zinc steel)
-
Stability requirement: Use with T-Legs or 90° Gondola Panels for freestanding support
-
Sold as: Individual connector